新闻

How to maintain the Drilling Rig during the Running in Period

June 11, 2021

UNIQUE Group-Batching plant|Concrete Batching Plant|Concrete Mixing Plant

How to maintain the Drilling Rig during the Running in Period

1. Pay attention to the working load during the running-in period. Generally, the working load during the running-in period should not exceed 80% of the rated working load, and a suitable workload should be arranged to prevent the occurrence of overheating caused by the continuous operation of the machine for a long time.

2. Keep the machine clean, adjust and tighten loose parts in time to prevent the loose parts from aggravating the wear of the parts or causing the parts to be lost.

3. Pay attention to frequently check the lubricating oil, hydraulic oil, coolant, brake fluid and fuel oil (water) level and quality, and pay attention to check the seal of the whole machine. Excessive oil and water shortage was found during the inspection, and the cause should be analyzed. At the same time, the lubrication of each lubrication point should be strengthened. It is recommended to add grease to the lubrication point during the running-in period (except for special requirements).

4. Pay attention to frequently observe the instructions of each instrument. If there is an abnormality, stop and remove it in time. If the cause is not found, the operation should be stopped before the fault is removed.

5. At the end of the running-in period, the machine should be subject to mandatory maintenance, inspection and adjustment should be done, and attention should be paid to the replacement of oil.

The requirements for use and maintenance of water well drilling rigs during the running-in period can be summarized as: load reduction, attention to inspection, and enhanced lubrication. As long as you pay attention to and implement the maintenance and maintenance of the construction machinery during the running-in period as required, it will reduce the occurrence of early failures, extend the service life, improve the operating efficiency, and bring you more economic benefits.

If you need drilling rig machine, welcome to inquiry us:

Website: http://www.unique-mixer.com

Email: sales@unique-cons.com

Whatsapp:+86 15538259609

sales@unique-cons.com
+86-371-63699132
0086-15538259609
hi-unique